Thursday, July 18, 2019

Continuous Monitoring on Wok Temperature - Double Steel Belt Heat PRess Machine

Continuous Monitoring on Wok Temperature - Double Steel Belt Heat Press Machine

Our Doubel Steel Belt Press and Heat, the picture below, has heating blocks in orange.
2 orange blocks in the upper conveyor.  The one on the left is for pre-heating.
Likewise there are 2 orange blocks in the lower conveyor. The one on the left is also for pre-heating.
There is clearance beween 2 heating blocks in the upper and other 2 heating blocks in the lower.
Load is applied from the upper blocks to the lower blocks.

A workpiece such as resin goes through the clearance.
It is heated and softened between steel belts.
It is also pressed and its thickness becomes depth of clearance.
Finally it goes out.

Structure of Double Steel Belt Press and Heat

During this process workpiece temperature goes up in the beginning 
and then is kep same for a while.
This change of temperature is shown in the fiture below.


A Workpiece Temperature Curve in Double Belt Heat and Press


A workpiece is processed, but we cannot watch it temperature.
But it is clear by temperature logging.
This logging is possible when you come to DYMCO and make tests.

If your try this test, please contact us.