DYMCO have produced perforated suction belts to process both surface of the work.
That process is inspection of the bothe sides and sometimes it is cleaning, and printing.
That process is inspection of the bothe sides and sometimes it is cleaning, and printing.
Nowadays PCB is getting to be flexible type.
Inkjet printing is done on both surface of paper.
Secondary battery material needs cleaning of both surface after being cut off from metal coils.
Demand of process on both surface of the work is obviously increasing.
When we process both surface, we need to turn over the work.
First process on the surface → turn over the work → process on the back surface.
However, if the work is fragile or large, it is extremely difficult to make the system which turns over the work.
Such system can be simple and shorter-time process if 2 or 3 suction conveyors are combined as below.
 |
Combination Example: 3 suction conveyors inspect both surface os the work
without turning over the work
Combination Example: Vacuum Conveyor 1 sucks the back surface of the work.
Vacuum Conveyor 2 sucks the surface of the work.
Hope you will try a stream line to process both surface of the work without turning-over process.
Steel Belt Videos: http://www.youtube.com/results?searcmh_query=dymcooverseas&sm=12
DYMCO, LTD. URL: http://www.steelbelt.jp
|
