At 40μm, recommended belt pulley diameter is 16mm. If it is i=5, it is 80mm. If it is i=10, it is 160mm.
However, please note that the wrapping angle of the steel belt on the original movement side should become small if deceleration ratios (i) are taken up to ten, bigger tension power will be needed.
Please contact us when i=5 is exceeded or if you would like to use diameter which is smaller than 16mm.
However, please note that the wrapping angle of the steel belt on the original movement side should become small if deceleration ratios (i) are taken up to ten, bigger tension power will be needed.
Please contact us when i=5 is exceeded or if you would like to use diameter which is smaller than 16mm.
Title: Steel Belt (10) Recommended belt pulley diameter
