Friday, February 10, 2012

Steel Belt and Tracking 7. EPC / Edge Positioning Control

These are cylinders in EPC systems. In general they are available in the market, not special parts. 2 cylinders are required in one conveyor. They are placed on both sides of the driven pulley shaft to move the shaft on the length direction for adequate tension.

Saturday, February 4, 2012

Steel Belt and Tracking 6. EPC / Edge Positioning Control



Our EPC, Edge Positioning Control targets wide conveyor belts under heat and hot dry air.

The whole system is as shown in the picture.






Friday, December 2, 2011

DYMCO won the "technical prize" from the Japan Mechanical Engineers Society.


DYMCO won the "technical prize" from the Japan Mechanical Engineers Society as of NOV.25, 2011.

TITLE: DYMCO won the "technical prize" from the Japan Mechanical Engineers Society.


Friday, November 18, 2011

Steel Belt and Tracking 5. EPC / Edge Positioning Control

Another tracking method is EPC. Belt position is watched by sensors.
When sensors find that the belt is out of track, pulley shaft is moved to adjust tension on both belt width edges.

EPC is especially important when the operating temperature is over 150 degrees.
In the room temperature crown pulleys are used. Up to 150degrees V-guide is available.
But V-guide does not stand heat over 150 degrees.

Title: Steel Belt and Tracking 5. EPC / Edge Positioning Control

Friday, October 7, 2011

Steel Belt and Tracking: 4. V-guide


When V-guide is attached on a belt, we cannot apply much tension on the belt. We had better make belts as loose as possible. Also V-guide is made from rubber. Even silicon rubber stands 150 degrees C. These are tips for V-guide tracking.

Title: Steel Belt and Tracking: 4. V-guide

Friday, September 30, 2011

Steel Belt and Tracking: 3. V-guide


V-guide or V-rope is another method for tracking. When driving pulley axis and driven pulley axis are set in parallel and V-guide is forwarded straight, a belt does not wind.

V-guide is made of rubber. Chloroprene(CR) and silicon rubber are standard material. Nitrile rubber (NBR) can be an option.

Title: Steel Belt and Tracking: 3. V-guide


Thursday, September 22, 2011

Steel Belt and Tracking: 2. Crown pulley

Crown pulley is the most popular tracking method for steel belts. For example, when pulley diameter is 100mmand belt size is thickness 0.2mm and width 200mm, curvature radius is R50,000.

This is same as crown height 0.1mm.It is significantly minute compared with millimeter-order crown height for plastic and rubber belts.

Yet crown pulley sometimes does not work, when belts are very thick, very wide, very long, or due to other factors such as conveyor structure and assembly precision.

Title: Steel Belt and Tracking: 2. Crown pulley