Friday, March 27, 2020

Low cost standard steel belt conveyor for your first trial

Low cost standard steel belt conveyor for your first trial


We have standard steel belt conveyors.
Especially the small one is the best for users, who use steel belts for the first time.

Steel belts are employed for particular reasons like clean room, hygiene food transport, heating and drying, and vacuum environment.

If you need to tackle contamination, particles, static electricity, vibration, very flat transport surface, we recommend to try this conveyor first for evaluation of effects with metal belts.
For the small size conveyor we offer the special price.
 

 

Posted by at
Labels: , ,

Thursday, March 12, 2020

Polished Metal Sleeves

 
Polished Metal Sleeves

One of our product line up is thin wall metal sleeve.  Thickness 0.1 to 0.3mm.
We can polish its surface up to Rz 0.1μm and less, same as JIS-‘01.
Much higher value of Rz is OK.
Also surface roughness and waves can be discussed.
The picture below is a polishsed Nickel seamless sleeve.

Polished Nickel Seamless Sleeve
 
In this picture we can find dots of a surface stone plate,
but those dots are not reflected on the inner surface.
The outer surface is finer than the inner surface
Further polishing is possible on this outer surface.  We also polish stainless steel sleeves.
Our polishing range and specs are flexible.
 
For details please contact overeas@dymco.co.jp for detailas.
We can offer various levels of polishing including limited area of polishing. 
 

Posted by at
Labels: , , ,

Friday, March 6, 2020

Best for Inspection - Stainless Steel Belt Conveyor and Vacuum conveyor

Best for Inspection - Stainless Steel Belt Conveyor and Vacuum conveyor


New coronavirus is getting serious here.
Although DYMCO is working as usual, schools are closed.
People's gatherings, events and business meetings are cancelled.
And now we know that virus inspection system is not sufficient here.
There are cases that people in need cannot apply inspection.
 
In the manufacturing industry, too, inspection is getting more important than ever to assure product quality.
Our metal belt conveyors are very good in 2 things when used for inspection.
 
１、Flat transport surface
Rigid metal belt convey things and yet serves flat transport surface.
Plastic and rubber belts cannot reach here.
 
２、Foils and films, very thin material is also transported in flat state.
Metal belt can hold air suction holes and realizes suction or vacuum transport.
Once film is placed on this belt, film does not move or fly away.
Its position on the belt is kept as it is and conveyed in flat state.
Tension is not applied either, so film is not stretched nor contracted.

For these reasons our customers adopt our metal belt conveyors for inspection.
Please contact overseas@dymco.co.jp.

 
 

 
Posted by at
Labels: , , , , , , ,
Subscribe to: Posts (Atom)