Steel Belt (17) Steel belt design advice

I am telling you on welded stainless steel belt design advice on this time. There are various belts: rubber, resin, timing, and V belt, etc.
Every belt has fixed minimum pulley size and roller diameter size, which is same for steel belts case and it is one of the most important items which we should be careful.I will explain this next time.

Title: Steel Belt (17) Steel belt design advice

Steel Belt (16)

▲cross-sectional slice of the welded steel belt

Thickness 0.3mm

We take the following welding method: TIG（Tungsten Inert Gas)　welding, Plasma welding, and Laser beam welding, etc. The above photograph is a cross-sectional slice of the welded steel belt. The black spots of the diamond shape are Marks where the welded parts hardness was measured.

DYMCO measures the weld strength and weld hardness of the steel belt by various welded conditions. We believe DYMCO deliver high quality steel belt products which respond to customer's demand.

Title: Steel Belt (16)

Steel Belt (15) Welded Steel Belt manufacturing method

1. CUT >> > 2. WELD

The welded steel belt is manufactured as shown in the above pictures.

1. We slit (cut) the high tension stainless spring steel band to target width.

2. Then we cut the belt to target length. Both ends of the belt are compared and welded, and we make it to the endless belt.

Title: Steel Belt (15) Welded Steel Belt manufacturing method

Steel Belt (14)

For instance, in high temperature environment, rubber and resin belts will be burned. In vacuum environment, if you use rubber and resin belts, out gas (gas discharged from the organic material) is generated and it is difficult to make high vacuum conditions. Additionally, stainless steel belts are suitable for food direct putting transportation and solve the problems of stopping on the belt and the difference of endless part.

Title: Steel Belt (14)